Home   >  Product   >  Battery Load Bank

LB-2483 (24V/48V 300A)

LB-2483 (24V/48V 300A)
LB-2483 (24V/48V 300A)
  • LB-2483 (24V/48V 300A)

Product Information

LB-2483 battery load bank is specially designed for discharge experiment, battery capacity test, battery maintenance, engineering examination and other tests for DC power with load. It is typically applied to 24V and 48V battery system in telecom with discharge current adjustable from 0 to 300A.

With its optional Data Acquisition Case (DAC), you will have a real-time monitoring for the whole process of discharge with wireless communication in PC.

Typical application: Telecom

Why PITE load units?
It is significant to check battery capacity in a regular basis. And the only reliable way to measure the battery capacity is to carry out a discharge test which is a must-to-do job to energize standby batteries and extend their life span.
PITE 3980 series DC load banks feature unique design and excellent performance that will facilitate your work for battery maintenance. It covers different types of batteries (1.2V, 2V, 6V and 12V). It has wide range of discharging from 12V to 220V for users from different area of industry. With optional DAC, discharge values of each cell could be viewed on the LCD display and computer simultaneously by using the PITE DataView software.

• Small unit with rolling wheels, convenient for onsite test
• Wide voltage range for battery discharge in different industries
• Optional wireless DAC enables real-time PC monitor for measurement
• It sets 4 conditions for discharge auto shut-down:
  Discharge time, discharge capacity, string voltage and cell voltage
• Continued discharge available when previous discharge is stop abnormally
• Parallel connection of two units for higher discharge current
• Can work with other load banks for assistant discharge
• Can monitor measurement of other load banks or battery charger
• Accurate data measurement and vivid waveforms
• Auto sorting for lag-out batteries during discharging
• Safe circuits avoids damage to battery during measurement
• Direct USB drive for convenient data transfer to PC
• Powerful management software for data analysis and report printing
• Automatic protection upon over heating and overload

PITE DataView
All standard load units of PITE 3980 come with analyzing software. With the PITE
DataView software, you have a real-time data monitoring, analyze the testing data and easily print out the complete report.

Technical Parameters
Mains Voltage
AC 220V/110V, 50/60Hz
For battery type
1.2V, 2V, 6V and 12V
Discharging Current
Accuracy: 1%   
Resolution: 0.1A or 0.5%
Max discharge current
Max power
Test range
10-27.6V (Nom: 24V):0-300A
10-55.2V (Nom: 48V):0-300A
Voltage Accuracy
Sampling Interval
5s --1min
LCD Display
128*64 pixel
5%~90% Relative humidity
Safety standard
CE marking, EMC standard
Dimension & Weight
(main unit)*
602*400*735mm, 40 kg

NOTE: Discharge current could be much higher with parallel connection of extra unit.

Optional Data Acquisition Case (DAC)
DAC is optional for wireless communication with PITE 3980 main unit and PC. The new insulation-protected DAC is rugged and capable to measure all type of batteries (1.2V, 2V, 6V and 12V).

Its Connection:
One DAC could be connected with 12 cells of 1.2V, 2V or 4 cells of 12V (or 6V). With DAC, PITE 3980 and PITE DataView software will be able to monitor and record voltage of each cell together with other parameter like String voltage, current, discharge capacity and so on.

In LB-2483 standard unit for testing 2V, 6V and 12V batteries, it needs 2 DACs for cell monitoring.If test 12V battery only,1 DAC is needed.


Message boardmin&max